Navigate
Critical Technology Solutions - Helpdesk
  • Register

  • or
  • Login
    Need a password reminder?
or
Contact Us
  • Get in touch

    Send us an email

  • Submit Community Topics

    Community Topics and suggestions submitted by customers like you

  • Knowledgebase Read help articles
  • Community Custom suggestions
  • Downloads Browse our downloads
  • Contact Us We are here to help
  • Portal
  • Knowledgebase
  • IP Surveillance
  • Reset Axis IP camera via hardware
Download PDF

Reset Axis IP camera via hardware

Support Team
2021-04-15
0 Comments
in IP Surveillance

Resetting by 'Hardware'
Resetting to the Factory Default Settings using the control button:

  1. Disconnect the power cable or PoE injector of the camera.
  2. Press and hold the 'Control' button on the camera while reapplying power.
  3. Keep the 'Control' button pressed until the 'Status' indicator color of the camera changes to amber. (This could take up to 15 seconds)
  4. Release the 'Control' button.
  5. When the 'Status' indicator changes to green (taking up to 60 seconds), the process is completed and the camera had a Factory Default Reset.
  • Tags
  • Axis camera
  • Reset Axis Camera
  • Reset Camera

Rate the quality of this page

This page was helpful :) :( This page was not helpful

29 of 52 people found this page helpful

Comments (0)

Add a comment

Quick Jump
  • Critical Technology Solutions - Helpdesk
  • Knowledgebase
  • Downloads
  • Community
  • Contact Us
Top
Helpdesk software provided by Deskpro